HVAC Help in Draper & Sandy, UT

By the Utah HVAC Connect editorial team · Published October 7, 2026 · Last updated October 7, 2026

TL;DR

East Sandy has the oldest housing on our local pages: median build years of 1984 (84092) and 1978 (84093), with 83% and 91% of units built before 2000. It also has the highest owner-occupancy: 90–93% (ACS 2020–2024).
Draper (84020) is newer, with a median of 2003 and 35% of units built in the 2000s, so original furnaces there are reaching common replacement age.
Sandy City lists an “A/C Furnace replacement” permit for the replacement or addition of any HVAC system.
Gas rebates come from Enbridge Gas ThermWise; Wattsmart dual-fuel rebates apply for Rocky Mountain Power customers. Free request; we don’t install or quote.

Utah HVAC Connect connects Draper and Sandy homeowners with licensed Utah HVAC contractors that serve their ZIP. We’re a matchmaker under Apex Lead Group, LLC: no technicians, no diagnosis, no quotes. We grouped Draper with east Sandy because they sit side by side on the southeast bench, but their homes differ by about two decades.

Sandy had about 94,988 residents in 2025 and Draper about 52,358 (48,812 of them in the Salt Lake County part of the city), per the Kem C. Gardner Policy Institute’s 2025 subcounty estimates. Sandy also includes other ZIPs (such as 84070 and 84094); enter yours on the form.

Draper and east Sandy housing data

Draper (84020) and east Sandy (84092, 84093): homes, age, and heating fuel
ZIP	Owner-occupied homes	Median year built	Built before 2000	Built 2000–09	Built 2010 or later	Heat with utility gas
84020 Draper	11,645 (69%)	2003	38%	35%	27%	80%
84092 Sandy (east)	8,469 (90%)	1984	83%	9%	7%	89%
84093 Sandy (east)	7,325 (93%)	1978	91%	3%	6%	88%

Source: U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates for ZIP Code Tabulation Areas (tables B25003, B25035, B25034, B25040), via Census Reporter: 84020, 84092, 84093. ZCTAs approximate USPS ZIP codes. Year-built shares are of all housing units; heating fuel is for occupied homes.

What the numbers suggest

General context, not a diagnosis:

East Sandy (84092, 84093): in homes built in the late 1970s and 1980s, the furnace and AC have very likely been replaced at least once. What matters is the age of the current equipment, not the house. Older homes also bring venting and ductwork questions: moving from an older 80% AFUE furnace to a 90%-plus condensing model usually needs new PVC venting and a condensate drain. Ask whether the bid covers it.
Adding or upgrading cooling: some older homes were built with smaller or no central AC. If a shop suggests a heat pump, our AC and heat pump page explains dual fuel and the 2026 rebates.
Draper (84020): with a 2003 median, many original furnaces are now past the 15-to-20-year span furnace makers commonly cite (American Standard). See our repair-or-replace questions.

Heating season on the southeast bench

At Salt Lake City International Airport, NOAA’s 1991–2020 normals show about 5,154 heating degree days a year, from 337 in October to 1,018 in December and 1,041 in January (NOAA monthly normals; annual). The south valley and benches sit higher than the airport, so treat the airport as a regional guide rather than a reading for your street.

Utilities and rebates

Gas: Enbridge Gas ThermWise listed $300 for a 95%–97.4% AFUE gas furnace and $350 for 97.5% AFUE or higher with an ECM blower, plus $700–$1,200 for qualifying dual-fuel systems, on October 7, 2026 (ThermWise).
Electric: if your bill says Rocky Mountain Power, Wattsmart listed up to $1,450 for an AHRI-rated dual-fuel heat pump system ($700 if not AHRI-rated), installed by a participating contractor in an existing single-family home (Wattsmart).
Federal: the 25C tax credit isn’t allowed for equipment placed in service after December 31, 2025 (IRS).

Permits in Sandy and Draper

Sandy City’s residential mechanical permit guide lists an “A/C Furnace replacement” permit for “the replacement or addition of any HVAC system,” which includes a gas line upgrade; a separate gas line permit covers gas line work that isn’t already part of another permit, and a general mechanical permit covers other alterations or repairs (Sandy residential mechanical permits; Sandy building permits). In Draper, start with the city’s building permits page. Ask your contractor whether the permit is in the bid.

Check the license before work starts

Before anyone works on your system, look the company up on DOPL’s free Licensee Lookup & Verification. You want an Active status and an HVAC classification (H100, or the older S350), under the same business name that’s on your estimate. Step-by-step: how to check a Utah HVAC license.

How matching works

Tell us what you need on the free Get Help form: service type (Repair, Replace, Install, Tune-up, or “I’m not sure”), urgency (Today, This week, or Planning), your ZIP, and when it’s reasonable to reach you.
We match licensed Utah shops that serve your ZIP. We don’t dispatch technicians, diagnose, or write proposals.
Matched pros may reach out using the contact details you provide. You talk with them, compare, and hire who you want, or no one. No homeowner fee and no obligation. More: how it works and how we make money.

Get Help →

Guides for Draper and Sandy homeowners

No heat or furnace not working: safety first, the basic checks furnace makers list, and what to tell a shop
Furnace replacement in Utah: repair-or-replace questions, what drives a bid, rebates, permits
AC and heat pump replacement: replace the AC only, dual fuel, or all-electric

Nearby: West Jordan & South Jordan · Riverton & Herriman · Lehi

How we put this page together

This page was written by the Utah HVAC Connect editorial team, not by a contractor. We used public data only: NOAA 1991–2020 climate normals, U.S. Census Bureau American Community Survey (ACS) estimates, and the rebate, permit, and licensing pages published by Utah utilities, cities, and DOPL, each checked on the date shown above. For this page we also pulled ZIP-level housing data and checked the city’s own building and utility pages. We don’t publish prices we can’t source, contractors can’t pay to be mentioned here, and we don’t name partner shops on this page. Programs and rules change, so confirm details with the program or your contractor before you sign anything. See our editorial policy. Spot an error? Email hello@lendifi.io.

Sources

Questions about the service: hello@lendifi.io.

FAQ

My east Sandy home is from the 1970s or ’80s. What should I ask an HVAC shop?

Ask how old the current furnace and AC are (they may not be original), what condition the venting and ductwork are in, and, if replacement comes up, whether the bid includes venting changes, any gas line work, the permit, and haul-away.

Do I need a permit to replace a furnace or AC in Sandy?

Yes. Sandy City lists an “A/C Furnace replacement” mechanical permit for the replacement or addition of any HVAC system. Contractors usually apply for it.

Is a heat pump a good idea for an older Sandy or Draper home?

It depends on the home, ductwork, and electrical panel, which a licensed shop assesses. Many Utah bids pair a heat pump with a gas furnace (dual fuel), and both Utah utilities list dual-fuel rebates.

Is Draper in Salt Lake County or Utah County?

Mostly Salt Lake County, with part of the city extending into Utah County. We cover both counties; enter your ZIP on the Get Help form.

Is the request free, and do you send the technician?

The request is free for homeowners with no obligation to hire. We don’t send technicians or quote; we’re a matchmaker that connects you with licensed Utah HVAC shops that serve your ZIP. Contractors who receive leads pay us.

Furnace, AC, and heat pump help in Draper & Sandy